jump to navigation

NFPA 770 Hybrid Technical Committee Meets in Orlando March 8, 2017

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, Uncategorized.
Tags: , , , , , , , , , , , ,
add a comment

The new NFPA technical committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems has gathered in Orlando, Florida for its fourth round of meeting beginning March 7 and concludes on March 9, 2017.

Looking to continue the development of  the new NFPA 770 Standard on Hybrid (Water and Inert Gas) Fire Extinguishing Systems, the committee welcomed principal and alternate members and several guests.  Chairman Jeff Harrington is leading the committee in the establishment of standards related to this fire-fighting technology that has been gaining marketplace acceptance for over the past 11 years.

At its December 2015  meeting, the NFPA Standards Council issued the following directive to the committee:

The Council considered the request of the Technical Committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems to revise the title and scope of the Technical Committee. After review of the material presented, the Council voted to deny the request of the Committee at this time. The Council notes the timing the request to change the scope of the Committee is premature and directs the Committee to continue drafting the document. Then, if necessary, the Committee can request Council revise the scope to reflect the drafted text of the document. The Council further cautions the Committee about removing the words “Fire Extinguishing” from the title of the Committee. The removal of these words will likely cause confusion as to what the Committee is authorized to address and were intentionally included to avoid this situation. In the present case, the Committee scope needs to address what the Committee does not cover to prevent overlap with other NFPA Committees’ responsibilities.

Standards Council Member James Golinveaux recused himself from the deliberations and vote on this issue.

 

The committee continues to work on its scope, and the standard at this meeting.  To learn more about the committee and its progress click here.

Largest Attendance of Industry Leaders Marks 35th FSSA Meeting February 19, 2017

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, Mass Notification Systems, NICET, Uncategorized.
Tags: , , , , , , , , , , , , , , ,
add a comment

 

file_000

Members gather for opening FSSA session.

The 35th annual meeting of the Fire Suppression Systems Association opened today with the largest attendance in the association’s history. President Ray Aldridge welcomed members and guests at the Naples Beach Hotel and Resort in Naples, Florida.

The day’s agenda included presentations ranging from a rollicking presentation from the Philadelphia Philly’s Phillie Phanatic’s best friend (Tom Burgoyne) to FSSA technical committee activities and from overviews of the impact of changes to NFPA standards to understanding the dynamics of Lithium Ion batteries and the very real hazards they present with their increased use in every day life. Other sessions scheduled for the three-day event include The Role of a Fire Protection Engineer in Design of Automatic Fire Extinguishing Systems; Oxygen Reducing Fire Protection Solutions; 10 Things Your Truck Dealer Won’t Tell You and Education Sessions on organizational and personal betterment and development.

The Fire Suppression Systems Association is a not-for-profit trade association, drawing members domestic and internationally and is comprised of a blend of designer/installers, manufacturers, consultants, academics, and suppliers working together to share ideas and strategies for the benefit of the fire suppression systems industry. FSSA members are dedicated to the highest level of safety, reliability and effectiveness of special hazards fire suppression.

Committee updates tout FSSA's industry influence

Committee updates tout FSSA’s industry influence

FSSA is dedicated to promoting use of, and being the recognized leader on, special hazard fire protection systems; employing existing and new technologies to safeguard people, high-value assets and the environment.  As a global reaching organization, they provide their members with support and guidance with many questions or issues that arise, with a strong united voice.

The annual meeting continues through Tuesday, February 21st.

 

San Antonio Welcomes NFPA 770 Hybrid Technical Committee October 14, 2016

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, Uncategorized.
Tags: , , , , , , , , , , , ,
add a comment

nfpa-770-drury-suitesThe new NFPA technical committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems has gathered in San Antonio, Texas for its third round of meeting beginning October 12 and concludes on October 14, 2016.

Looking to continue the development of  the new NFPA 770 Standard on Hybrid (Water and Inert Gas) Fire Extinguishing Systems, the committee welcomed principal and alternate members and several guests.  Vice-Chairman Brent Ehmke of Ehmke and Associates is leading the committee in the establishment of standards related to this fire-fighting technology that has been gaining marketplace acceptance for over the past 10 years.

At its December 2015  meeting, the NFPA Standards Council issued the following directive to the committee:

The Council considered the request of the Technical Committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems to revise the title and scope of the Technical Committee. After review of the material presented, the Council voted to deny the request of the Committee at this time. The Council notes the timing the request to change the scope of the Committee is premature and directs the Committee to continue drafting the document. Then, if necessary, the Committee can request Council revise the scope to reflect the drafted text of the document. The Council further cautions the Committee about removing the words “Fire Extinguishing” from the title of the Committee. The removal of these words will likely cause confusion as to what the Committee is authorized to address and were intentionally included to avoid this situation. In the present case, the Committee scope needs to address what the Committee does not cover to prevent overlap with other NFPA Committees’ responsibilities.

Standards Council Member James Golinveaux recused himself from the deliberations and vote on this issue.

 

The committee continues to work on its scope, and the standard at this meeting.  To learn more about the committee and its progress click here.

Great Plains Fire Suppression Symposium To Highlight Industry Innovations August 31, 2016

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Iowa Alarm Association, NICET.
Tags: , , , , , , , , , , , , , , , ,
add a comment

The Great Plains Fire Suppression Symposium set for September 13, 2016 in Omaha, Nebraska will highlight industry innovations in NFPA standards, agent delivery systems, fire extinguishing technology and ATF-mandated considerations.  Experts in all four subjects will present during the morning-long event.Fire Symposium logo

NFPA 3 and NFPA 4 Requirements for Delivering Higher Stakeholder Confidence will be presented by Shane Clary, Ph.D.  Vice President, Codes & Standards, Development;
Bay Alarm Co. and a member of both technical committees. He’ll provide background and insights on these important documents and outline key factors on how best to implement these requirements that bolster stakeholder confidence in all fire systems.

Innovations in Fire Suppression System Technologies provides an understanding from Tim Carman, P.E. Regional Sales Director; Janus Fire Systems on how maximizing agent delivery technologies are impacting fire suppression systems by using higher discharge pressures. Innovations like these are making fire suppression more affordable and accessible than ever.

Hybrid (Nitrogen-Water Mist) Fire Suppression Technology and the new NFPA 770 is a truly unique opportunity to learn directly from the patent holder, Robert Ballard, P.E. Fire Suppression Technology Manager with Victaulic, on how the advanced technology of hybrid fire suppression systems are addressing real-world applications. Plus an update on how the new NFPA 770 standard is being developed to address these systems.

Understanding ATF Regulations Affecting Fire Suppression Releasing Devices is crucial for anyone involved with such systems. Shane Mullen, Managing Director of Device Disposal and Consulting will highlight key requirements for safely handling and disposing of these devices.

The Symposium is a free half-day symposium dedicated to information and education for professionals involved with fire suppression as owners, consultants, specifiers, and end-users.  Continuing Education attendance credit will be provided to each attendee.  A buffet breakfast will also be provided.

Seating is limited, so reservations are required.  Visit www.protexcentral.com to learn more and register today!

 

2nd FSSA Day Features Technical and Business Tracks February 22, 2016

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, Mass Notification Systems, NICET, PSA, Uncategorized.
Tags: , , , , , , , , , , , , , , ,
add a comment
FSSA's 34th meeting ls largest ever.

FSSA’s 34th meeting ls largest ever.

The second day of the Fire Suppression Systems Association’s 34th annual meeting was highlighted by separate technical and business tracks for attendees.

The business track featured understanding communication styles in business settings; planning for business transitions; and mitigating risk and loss in insurance and liability.

Technical sessions included wireless technology & fire suppression; learning of fires in mission critical facilities; and fire protection strategies in air containment aisles.

28 companies have supporedt the FSSA 34th annual meeting with sponsorships of speakers, presentations, breaks, dinners and receptions.

The meeting continues through Tuesday, February 23rd.

34th FSSA Meeting Boasts Largest Attendance Ever February 21, 2016

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, Uncategorized.
Tags: , , , , , , , , , , , , , , ,
add a comment
Members gather for opening FSSA session.

Members gather for opening FSSA session.

The 34th annual meeting of the Fire Suppression Systems Association opened today with the largest attendance in the association’s history. President Tim Carman welcomed members and guests at the El Conquistador Resort outside of San Juan, Puerto Rico.

The day’s busy agenda included presentations ranging from an economic outlook and forecast from Dr. Alan Beaulieu of ITR Economics to FSSA technical committee activities and from overviews of the impact of NFPA’s recommended practice (NFPA 3) and standard (NFPA 4) to understanding agent design concentration on Class C fires greater than 480 volts.  And if that wasn’t enough, others presentations involved stopping the employee turnover revolving door and appreciating that every face tells a story of experience and demeanor.

The Fire Suppression Systems Association is a not-for-profit trade association, drawing members domestic and internationally and is comprised of a blend of designer/installers, manufacturers, consultants, academics, and suppliers working together to share ideas and strategies for the benefit of the fire suppression systems industry. FSSA members are dedicated to the highest level of safety, reliability and effectiveness of special hazards fire suppression.

Committee updates tout FSSA's industry influence

Committee updates tout FSSA’s industry influence

FSSA is dedicated to promoting use of, and being the recognized leader on, special hazard fire protection systems; employing existing and new technologies to safeguard people, high-value assets and the environment.  As a global reaching organization, they provide their members with support and guidance with many questions or issues that arise, with a strong united voice.

The annual meeting continues through Tuesday, February 23rd.

 

NFPA 770 Hybrid Technical Committee Meets In Charleston February 2, 2016

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, Uncategorized.
Tags: , , , , , , , , , , , ,
add a comment

The new NFPA technical committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems has gathered in Charleston, South Carolina for its second round of meeting beginning February 2, 2016. IMG_0853

Looking to continue the development of  the new NFPA 770 Standard on Hybrid (Water and Inert Gas) Fire Extinguishing Systems, the committee welcomed principal and alternate members and several guests.  Chairman Jeffery Harrington of the Harrington Group is leading the committee in the establishment of standards related to this fire fighting technology that has been gaining marketplace acceptance for over the past 10 years.

At its December 2015  meeting, the NFPA Standards Council issued the following directive to the committee:

The Council considered the request of the Technical Committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems to revise the title and scope of the Technical Committee. After review of the material presented, the Council voted to deny the request of the Committee at this time. The Council notes the timing the request to change the scope of the Committee is premature and directs the Committee to continue drafting the document. Then, if necessary, the Committee can request Council revise the scope to reflect the drafted text of the document. The Council further cautions the Committee about removing the words “Fire Extinguishing” from the title of the Committee. The removal of these words will likely cause confusion as to what the Committee is authorized to address and were intentionally included to avoid this situation. In the present case, the Committee scope needs to address what the Committee does not cover to prevent overlap with other NFPA Committees’ responsibilities.

Standards Council Member James Golinveaux recused himself from the deliberations and vote on this issue.

 

The committee continues to work on its scope, and the standard at this meeting.  To learn more about the committee and its progress click here.

February 1 Marks Protex Central’s 50th Year February 1, 2016

Posted by shawnpci in Change Leadership, Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, PSA, Security Systems.
Tags: , , , , , , , , , , , , , , ,
add a comment

40510 50 Year LogoMonday, February 1, 2016, marks the 50th anniversary of Protex Central, Inc. For these past 50 years, Protex Central has been providing life safety systems and services to customers throughout Nebraska and Iowa.

With employees who are dedicated to providing the company’s core values through excellence, professionalism and integrity, Protex Central thrives in addressing key life safety and security issues for its customers.

Company founder and chairman of the board, Dennis J. Mullen, continues to djmpixmentor employees with his collaborative and professional approach to customer service. “People do business with people.” says Mullen. “Honesty and integrity are the backbone of the systems we provide and support for our customers. Take away either of those, and you have nothing of value to offer.”

Protex Central service representatives are on call and available 24/7. Service technicians are well versed in the inspection, maintenance and repair of all types of life safety systems including fire suppression systems. All technicians are manufacturer trained, licensed, and certified. The company has become skilled at developing a turn-key plan to deliver the needed level of response so customers will know their people and property are protected around the clock with Protex’s sole mission plan in mind – To strengthen our business by protecting yours!

By investing significant resources in the development of its professionals, Protex Central is uniquely positioned to best understand the needs of the industries it serves.

Protex Central continues to lead solutions in the fields of:

Fire Protection Systems
Clean Agent Fire Suppression Systems
Emergency Communication Systems
Explosion Protection Systems
Fire Extinguishers
Fire Suppression Systems
Fire Alarm and Detection Systems
Range Hood Fire Suppression Systems

Security Systems
Access Control
Closed Circuit TV (CCTV)
Nurse Call Systems
Security
Sound/Intercom Systems

Life Safety System Services
On Site Service & Inspection
Remote Monitoring

Customers have come to know over these past 50 years that with Protex it’s the protection they pay for, but peace of mind is what they get.

New NFPA Hybrid Technical Committee Meets September 30, 2015

Posted by shawnpci in Fire Protection, Fire Systems, FSSA, Good Stuff to Share, NICET, Uncategorized.
Tags: , , , , , , , , , , , ,
add a comment

The new NFPA technical committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems began its inaugural meetings in St. Louis, Missouri on Tuesday and Wednesday, September 29 and 30, 2015.

IMG_1178
Looking to develop the new NFPA 770 Standard on Hybrid (Water and Inert Gas) Fire Extinguishing Systems, the committee was represented by nine principal members, an alternate principal member and several guests.  Chairman Jeffery Harrington of the Harrington Group is leading the committee in the establishment of standards related to this fire fighting technology that has been gaining marketplace acceptance for over the past 10 years.

At its October 2014 meeting, the NFPA Standards Council voted to approve the development of a new committee and a new document on Hybrid (Water and Inert Gas) Fire Extinguishing Systems. The Council directed that a call of members interested in serving on the proposed new Technical Committee be published.  NFPA Staff was directed to return to the Council with a proposed startup roster and a proposed committee scope.

In April of this year, the Council voted to approve the proposed scope for the Technical Committee on Hybrid (Water and Inert Gas) Fire Extinguishing Systems as follows:

APPROVED COMMITTEE SCOPE:  This committee shall have primary responsibility for documents covering the design, installation, operation, and maintenance of hybrid (water and inert gas) fire extinguishing systems that use a combination of atomized water and inert gas to extinguish fire.  This scope does not include systems that use only inert gas or only atomized water (water mist) to achieve extinguishment.  It also does not include twin fluid water mist systems that use inert gas to propel and/or atomize water mist droplets without generating a significant inert gas concentration in the protected space.

The committee will continue to work on its scope, and the standard for the next several months.  To learn more about the committee and its progress click here.

Central Iowa Code Consortium Seeks Proposals August 4, 2015

Posted by shawnpci in Fire Protection, Fire Systems, Iowa Alarm Association, Mass Notification Systems.
Tags: , , , , , , , , , , , , , , ,
add a comment

The Central Iowa Code Consortium (CICC) announced on August 1, 2015 that code proposals will be accepted for all of the International Code Council’s construction and maintenance codes through September 30, 2015.  During the coming months seven code committees, made up of local government and industry representatives, will review the 2015 editions of the International Codes as well as local proposed changes to those codes.Screen Shot 07-28-15 at 11.01 AM

The CICC is a collaborative effort between all participating communities to review code changes, recommend changes to these codes, and produce a metro “model” code for all communities to consider through their local code adoption process.  This project does not propose to make recommendations on permit process, code administration, appeals processes, or specific local amendments deemed necessary by local code officials.  The goal is to publish a metro code that would promote uniformity and consistency between local communities.

Central Iowa communities with memos of understanding in place to participate in the CICC process include:  Altoona, Ankeny, Bondurant, Carlisle, Clive, Des Moines, Grimes, Johnston, Norwalk, Pleasant Hill, Polk City, Urbandale, Waukee, Windsor Heights, West Des Moines and Polk County.

Anyone can submit code proposal through the on-line submission form located here.

For more information on the Capital Crossroads Vision, click here.